NEWMEN Evolution SL A.30 Fade Boost Disc 6-Bolt- front wheel 29"/rear wheel 27,5" - SRAM XD Driver - Wheelset

Article-No. 111690

The NEWMEN Evolution SL A.30 is a high-end wheelset with high quality aluminum rim. The wheelset is suitable for all-mountain and enduro use.

Application: All Mountain, Enduro

Wheel size: front wheel 29 "/ rear wheel 27.5 "

Tire type: clincher / folding tire

Number of spokes: 28

Brake system: Disc 6-bolt

Wheel standard: Boost

Tubeless system: Tubeless Ready

Technical data of the rims:

Type: Evolution SL A.30

Dimension (ETRTO): Front wheel 30-622/Rear wheel 30-557

Rim width inside: 30 mm

Rim height: 20 mm

ERD: front wheel 622 mm/rear wheel 557mm

Valve hole (diameter): SV (6.5 mm)

Material rim: aluminum

Technical data front wheel hub:


NEWMEN FADE Straightpull

Installation width: 15 x 110 mm thru axle

Bearing: 2 deep groove ball bearings

Hub body material: aluminum

Technical data rear hub:

Type: NEWMEN FADE Straightpull

Installation width: 12 x 148 mm thru axle

Freewheel: SRAM XD

Bearing: 4 deep groove ball bearings

Material hub body: aluminum

Material freewheel body: aluminum

Freewheel system: 3 pawls, 36 tooth pitch

Technical data lacing: 3-fold crossed

Spoke type: Sapim D-Light


Weight limit: 125 kg system weight

Max. air pressure: 2.4 bar

Recommended tire width: 2.3 - 2.5"


High-end all-mountain aluminum wheelset

handmade in Germany

high-strength aluminum alloy

tubeless capable hookless design

required rim tape 30 - 34 mm

Special Highlights:

MG Washer:

The weak point of aluminum or carbon rims, the nipple holes in the rim, is reinforced at NEWMEN with an MG-Washer. This is the solution that uses the least amount of material, so there is virtually no weight impact. The MG washer is concave on both sides. This means that it can be installed in both directions. In addition, the contact surface on the rim side moves away from the nipple hole of the rim and additionally relieves the rim. Another advantage is the uniform friction between nipple and washer, which prevents the " seizing" of the nipple.

Rim profile without edges and corners:

The rim profile without edges and corners has flared rim flanks with optimized horn height and wall thickness. The wall thickness has been increased at the rim flange and reduced at the sides.

The flared rim flanks shorten the distance between the left and right rim flanges, which saves material and thus weight. Since the tire can also take on a rounder shape, comfort and cornering grip are improved.


Rim: black with gray decals

Hub: black

Spokes: black

nipple: black

Scope of delivery:

1 x wheelset NEWMEN Evolution SL A.30 FADE (front wheel and rear wheel)

Item condition:

The item is new, unused and free of damage.


1780 g (manufacturer's specification without guarantee).

Manufacturer Part No.: front wheel 90633, rear wheel 90638

The picture shows the wheelset in the 29" variant. Supplied is the wheelset with 29 "front wheel and 27.5 "rear wheel.


499.00 €