The NEWMEN Evolution SL A. is a high-end aluminium wheelset. This wheels set is suitable for all mountain and enduro use. Application: All Mountain, Enduro Wheel Size: 29" Tyre Type: clincher tyre Number of Spokes: 28 Brake Type: 6-bolt disc Wheel Standard: Boost Tubeless System: Tubeless Ready Technical Information - Rim: Type: Evolution SL A.30 Dimensions (ETRTO): 30-622 Inner Width: 30 mm Depth: 20 mm ERD: 622 mm Valve Hole Diameter: SV / Presta (6.5 mm) Rim Material: aluminium Technical Information - Front Hub: Type: NEWMEN FADE Straightpull Axle style: 15 x 110 mm thru-axle Bearings: 2 deep groove ball bearings Body Material: aluminium Technical Information - Rear Hub: Type: NEWMEN FADE Straightpull Axle style: 12 x 148 mm thru-axle Bearings: 4 deep groove ball bearings Body Material: aluminium Freehub Body Material: aluminium Freehub Body: 3 pawls, 36 tooth pitch Technical Information - Lacing: Lacing Pattern: 3-cross Spoke Type: Sapim D-Light Weight Limit: 125 kg (system weight) Air Pressure (max.): 2.4 bar Recommended Tyre Width: 2.3 - 2.5" Features: high-end All Mountain aluminium wheelset hand-assembled in Germany high-strength aluminium alloy tubeless compatible hookless design required rim tape 30 - 34 mm Featured Technologies: MG-Washer: The weak point of aluminium or carbon rims, the nipple holes in the rim, is reinforced with an MG washer at NEWMEN. This is the solution with the least amount of material used, so that there is practically no effect on weight. The MG-Washer is concave on both sides. This means that it can be installed in both directions, and the contact surface on the rim side moves away from the nipple hole of the rim, thus providing additional relief. Another advantage is the even friction between nipple and washer, which prevents the nipple from " eating". Rounded Rim Profile: The rounded rim profile has flared rim flanges with optimised flange height and wall thickness. The wall thickness on the rim flange has been increased, in the side area reduced. The flared rim flanges shorten the distance between left and right rim flange, which saves material and weight. The tyre can also take on a rounder shape, improving comfort and cornering grip. Colour: Rim: black w/ grey decals Hub: black Spokes: black Nipples: black Models: 29" set (front 15x110 + rear 12x148) SRAM XD: Freehub: SRAM XD Gearing: 11-/12-speed Manufacturer Number: 90433 + 90434 29" set (front 15x110 + rear 12x148) Shimano Micro Spline: Freehub: Shimano Micro Spline Gearing: 12-speed Manufacturer Number: 90433 + 90435 29" set (front 15x110 + rear 12x148) Shimano: Freehub: Shimano MTB Gearing: 8-/9-/10-/11-speed Manufacturer Number: 90433 + 90436 Contents: 1 x NEWMEN Evolution SL A.30 Fade wheelset (front and rear wheel) Condition of the product: The product is new, never used and free from any defects. Weight: 1780 g (weight announced by the brand, indicative) Newmen Art.: 90633, 90634 EAN: 4054571185129; 4054571185143

The NEWMEN Evolution SL A.30 is a high-end wheelset with high quality aluminum rim. The wheelset is suitable for all-mountain and enduro use. Application: All Mountain, Enduro Wheel size: front wheel 29 "/ rear wheel 27.5 " Tire type: clincher / folding tire Number of spokes: 28 Brake system: Disc 6-bolt Wheel standard: Boost Tubeless system: Tubeless Ready Technical data of the rims: Type: Evolution SL A.30 Dimension (ETRTO): Front wheel 30-622/Rear wheel 30-557 Rim width inside: 30 mm Rim height: 20 mm ERD: front wheel 622 mm/rear wheel 557mm Valve hole (diameter): SV (6.5 mm) Material rim: aluminum Technical data front wheel hub: Type: NEWMEN FADE Straightpull Installation width: 15 x 110 mm thru axle Bearing: 2 deep groove ball bearings Hub body material: aluminum Technical data rear hub: Type: NEWMEN FADE Straightpull Installation width: 12 x 148 mm thru axle Freewheel: SRAM XD Bearing: 4 deep groove ball bearings Material hub body: aluminum Material freewheel body: aluminum Freewheel system: 3 pawls, 36 tooth pitch Technical data lacing: 3-fold crossed Spoke type: Sapim D-Light Approvals: Weight limit: 125 kg system weight Max. air pressure: 2.4 bar Recommended tire width: 2.3 - 2.5" Features: High-end all-mountain aluminum wheelset handmade in Germany high-strength aluminum alloy tubeless capable hookless design required rim tape 30 - 34 mm Special Highlights: MG Washer: The weak point of aluminum or carbon rims, the nipple holes in the rim, is reinforced at NEWMEN with an MG-Washer. This is the solution that uses the least amount of material, so there is virtually no weight impact. The MG washer is concave on both sides. This means that it can be installed in both directions. In addition, the contact surface on the rim side moves away from the nipple hole of the rim and additionally relieves the rim. Another advantage is the uniform friction between nipple and washer, which prevents the " seizing" of the nipple. Rim profile without edges and corners: The rim profile without edges and corners has flared rim flanks with optimized horn height and wall thickness. The wall thickness has been increased at the rim flange and reduced at the sides. The flared rim flanks shorten the distance between the left and right rim flanges, which saves material and thus weight. Since the tire can also take on a rounder shape, comfort and cornering grip are improved. Color: Rim: black with gray decals Hub: black Spokes: black nipple: black Scope of delivery: 1 x wheelset NEWMEN Evolution SL A.30 FADE (front wheel and rear wheel) Item condition: The item is new, unused and free of damage. Weight: 1780 g (manufacturer's specification without guarantee). Manufacturer Part No.: front wheel 90633, rear wheel 90638 The picture shows the wheelset in the 29" variant. Supplied is the wheelset with 29 "front wheel and 27.5 "rear wheel.

The EXC 1200 Spline wheelset combines reliability with low weight. The new Ratchet EXP freewheel system is particularly finely toothed and the lightweight carbon rim (30 mm Inner width) reduces the inertia noticeably. Released is the Enduro wheelset for ASTM category 4 and 130 kg system weight. Weight 1670 g. Wheel size: 29 Freewheel: SRAM XD Freewheel body: Ratchet EXP 36 Material rim: Carbon Inner width: 30mm Outer width: 36mm Rim height: 25mm Number of holes/spokes: 28 Hub type: 180 Axles: Front wheel: 15 x 110mm / Rear wheel: 12 x 148mm Valve hole: Presta Brake disc mount: IS 6-bolt Spokes: Front wheel: DT aerolite® straightpull / rear wheel: DT aero comp® straightpull Nipple: DT ProLock Squorx ProHead alu Lacing: Three-cross (1:1)

The XMC 1501 Spline One wheelset combines reliability with low weight. The new Ratchet EXP freewheel system is particularly finely toothed and the lightweight carbon rim (30 mm Inner width) reduces the inertia noticeably. Released is the All-Mountain wheelset for ASTM category 4 and 120 kg system weight. Weight 1667 g. Wheel size: 29 " Freewheel: SRAM XD Freewheel body: Ratchet EXP 36 Material rim: Carbon Inner width: 30mm Outer width: 36mm Rim height: 25mm Number of holes/spokes: 28 Hub type: 240 Axles: Front wheel: 15 x 110mm / Rear wheel: 12 x 148mm Valve hole: Presta Brake disc mount: IS 6-hole Spokes: Front wheel: DT competition® race straightpull / Rear wheel: DT competition® race straightpull Nipple: DT ProLock Squorx ProHead alu Lacing: Three-cross (1:1)

The NEWMEN Evolution SL A. is a high-end aluminium wheelset. This wheels set is suitable for all mountain and enduro use. Application: All Mountain, Enduro Wheel Size: 29" Tyre Type: clincher tyre Number of Spokes: 28 Brake Type: 6-bolt disc Wheel Standard: Boost Tubeless System: Tubeless Ready Technical Information - Rim: Type: Evolution SL A.30 Dimensions (ETRTO): 30-622 Inner Width: 30 mm Depth: 20 mm ERD: 622 mm Valve Hole Diameter: SV / Presta (6.5 mm) Rim Material: aluminium Technical Information - Front Hub: Type: NEWMEN FADE Straightpull Axle style: 15 x 110 mm thru-axle Bearings: 2 deep groove ball bearings Body Material: aluminium Technical Information - Rear Hub: Type: NEWMEN FADE Straightpull Axle style: 12 x 148 mm thru-axle Bearings: 4 deep groove ball bearings Body Material: aluminium Freehub Body Material: aluminium Freehub Body: 3 pawls, 36 tooth pitch Technical Information - Lacing: Lacing Pattern: 3-cross Spoke Type: Sapim D-Light Weight Limit: 125 kg (system weight) Air Pressure (max.): 2.4 bar Recommended Tyre Width: 2.3 - 2.5" Features: high-end All Mountain aluminium wheelset hand-assembled in Germany high-strength aluminium alloy tubeless compatible hookless design required rim tape 30 - 34 mm Featured Technologies: MG-Washer: The weak point of aluminium or carbon rims, the nipple holes in the rim, is reinforced with an MG washer at NEWMEN. This is the solution with the least amount of material used, so that there is practically no effect on weight. The MG-Washer is concave on both sides. This means that it can be installed in both directions, and the contact surface on the rim side moves away from the nipple hole of the rim, thus providing additional relief. Another advantage is the even friction between nipple and washer, which prevents the nipple from " eating". Rounded Rim Profile: The rounded rim profile has flared rim flanges with optimised flange height and wall thickness. The wall thickness on the rim flange has been increased, in the side area reduced. The flared rim flanges shorten the distance between left and right rim flange, which saves material and weight. The tyre can also take on a rounder shape, improving comfort and cornering grip. Colour: Rim: black w/ grey decals Hub: black Spokes: black Nipples: black Models: 29" set (front 15x110 + rear 12x148) SRAM XD: Freehub: SRAM XD Gearing: 11-/12-speed Manufacturer Number: 90433 + 90434 29" set (front 15x110 + rear 12x148) Shimano Micro Spline: Freehub: Shimano Micro Spline Gearing: 12-speed Manufacturer Number: 90433 + 90435 29" set (front 15x110 + rear 12x148) Shimano: Freehub: Shimano MTB Gearing: 8-/9-/10-/11-speed Manufacturer Number: 90433 + 90436 Contents: 1 x NEWMEN Evolution SL A.30 Fade wheelset (front and rear wheel) Condition of the product: The product is new, never used and free from any defects. Weight: 1780 g (weight announced by the brand, indicative) Newmen Art.: 90633, 90635 EAN: 4054571185129; 4054571185143

The EXC 1200 Spline wheelset combines reliability with low weight. The new Ratchet EXP freewheel system is particularly finely toothed and the lightweight carbon rim (30 mm Inner width) reduces the inertia noticeably. Released is the Enduro wheelset for ASTM category 4 and 130 kg system weight. Weight 1640 g. Wheel size: front wheel 29 "/ rear wheel 27.5 " Freewheel: SRAM XD Freewheel body: Ratchet EXP 36 Material rim: Carbon Inner width: 30mm Outer width: 36mm Rim height: 25mm Number of holes/spokes: 28 Hub type: 180 Axles: Front wheel: 15 x 110mm / Rear wheel: 12 x 148mm Valve hole: Presta Brake disc mount: IS 6-bolt Spokes: Front wheel: DT aerolite® straightpull / rear wheel: DT aero comp® straightpull Nipple: DT ProLock Squorx ProHead alu Lacing: Three-cross (1:1) The picture shows the wheelset in the 29" variant. Supplied is the wheelset with 29 "front wheel and 27.5 "rear wheel.

The XMC 1501 Spline One wheelset combines reliability with low weight. The new Ratchet EXP freewheel system is particularly finely toothed and the lightweight carbon rim (30 mm inner width) reduces the inertia noticeably. Released is the all-mountain wheelset for ASTM category 4 and 120 kg system weight. Weight 1667 g. Wheel size: 29" Freewheel: SHIMANO MICROSPLINE Freewheel body: Ratchet EXP 36 Material rim: Carbon Inner width: 30mm Outer width: 36mm Rim height: 25mm Number of holes/spokes: 28 Hub type: 240 Axles: Front wheel: 15 x 110mm / Rear wheel: 12 x 148mm Valve hole: Presta Brake disc mount: IS 6-bolt Spokes: Front wheel: DT competition® race straightpull / Rear wheel: DT competition® race straightpull Nipple: DT ProLock Squorx ProHead alu Lacing: Three-cross (1:1)