Detail:

Extension:

Catekorie:

TEST: 1

CLAY V1/V2 LINK FÜR 27,5
CLAY V1/V2 LINK FÜR 27,5" REAR WHEEL
Link for the CLAY V1 and V2 for shocks with the installation length 210x55.
Price 59.90 EUR
Price incl. VAT
Plus shipping
Available
LAST THROUGH AXLE
LAST THROUGH AXLE
The through axle we developed has a conical tip as a threading aid. It is operated with an Allen key. We recommend this axle for riders over 80 kg and for all riders who put extreme strain on your bike. This axle is suitable for riders with a weight of 90 kg or more necessary. Weight: 46g
Price 19.00 EUR
Price incl. VAT
Plus shipping
Available
BEARING 15X28X7 BLACK OXIDE
BEARING 15X28X7 BLACK OXIDE
Enduro Bearings Max Black Oxide. Fully spherical, deep groove ball bearing sealed on both sides in the dimensions 28x15x7 mm. The Max Black Oxide bearings have a special coating to protect against rust. Item contains 1x 110716
Price 9.90 EUR
Price incl. VAT
Plus shipping
Available
Sleeve Nut M6 Titanium
Sleeve Nut M6 Titanium
Sleeve mounting hardware for lower shock mount Contains item 110275 1x
Price 11.90 EUR
Price incl. VAT
Plus shipping
Available
DERAILLEUR HANGER - 148 MM - COAL / CLAY
DERAILLEUR HANGER - 148 MM - COAL / CLAY
Replacement derailleur hanger for 148 mm hub width. Compatible with the models: CLAY (V01 + V02), COAL (V01 + V02) including derailleur hanger (102067) and M4 bolt
Price 24.90 EUR
Price incl. VAT
Plus shipping
Available
CLAY  V1/V2 ROCKERSET
CLAY V1/V2 ROCKERSET
Rocker Set for the CLAY V01 and V02 with 140 mm travel for shocks with the installation length 210x55. The set is supplied ready for installation incl. the ball bearings from Enduro Bearings and trunnion bolts.
Price 149.00 EUR
Price incl. VAT
Plus shipping
Available
COAL V1/V2 LINK FOR 27,5
COAL V1/V2 LINK FOR 27,5" REAR WHEEL
Link for the COAL V1 for shocks with the installation length 216x63. Link for the COAL V2 for shocks with the installation length 210x55.
Price 59.90 EUR
Price incl. VAT
Plus shipping
Available
CABLE INSERT 1 PIECE CLAY / GLEN / COAL
CABLE INSERT 1 PIECE CLAY / GLEN / COAL
For CLAY (V01/V02), GLEN (V01/V02) and COAL (V01/V02/V03) frames to run the cable of the rear brake and the shift cable housing through the rear frame (GLEN V02 and COAL V03), as well as the seat post cable through the main frame (all versions).
Price 9.90 EUR
Price incl. VAT
Plus shipping
Available
BEARING SERVICE TOOL COAL V1/V2 - CLAY V1/V2 - GLEN V1
BEARING SERVICE TOOL COAL V1/V2 - CLAY V1/V2 - GLEN V1
With this tool you can press the bearings out and back in on COAL V1/V2 - CLAY V1/V2 and GLEN V1 frames. This tool is suitable for the models COAL V1/V2 - CLAY V1/V2 and GLEN V1 to be able to change the bearings cleanly and easily.
Price 39.00 EUR
Price incl. VAT
Plus shipping
Available
Cane Creek  40 preload set
Cane Creek 40 preload set
The Cane Creek preload kit matches the style of the 40 series head set. Weight 27 g.
Price 9.90 EUR
Price incl. VAT
Plus shipping
Available
COAL V2 ROCKERSET
COAL V2 ROCKERSET
Rocker Set for the COAL V01 with 160 mm travel for shocks with the installation length 210x55. The set is supplied ready for installation incl. the ball bearings from Enduro Bearings and trunnion bolts.
Price 149.00 EUR
Price incl. VAT
Plus shipping
Available
BEARING 15X28X7 STAINLESS
BEARING 15X28X7 STAINLESS
Enduro Bearings Max Type. Fully spherical, rust-proof deep groove ball bearing sealed on both sides in the dimensions 28x15x7 mm. Specially designed for use in full suspension frames and fully filled with water resistant grease. Item contains 1x 101075
Price 12.90 EUR
Price incl. VAT
Plus shipping
Available
C-LOCK RING - ROTORCLIP - SIZE 28
C-LOCK RING - ROTORCLIP - SIZE 28
Contains C-LOCK RING ROTORCLIP with item number 102362 1x
Price 0.90 EUR
Price incl. VAT
Plus shipping
Available
BOLT FOR SHOCK DIN 912 M8X55 -TITAN Gr.5
BOLT FOR SHOCK DIN 912 M8X55 -TITAN Gr.5
Bolt for upper Shock Mount CELOS, ASCO & GLEN Beeinhaltet Artikel 102359 1x
Price 9.90 EUR
Price incl. VAT
Plus shipping
Available
C-LOCK RING SIZE 28
C-LOCK RING SIZE 28
Zur Sicherung der Hauptlager im Rocker (GLEN/COAL/CELOS/ASCO/CINTO/TARVO) Beinhaltet den Artikel 101873 1x
Price 0.90 EUR
Price incl. VAT
Plus shipping
Available
BOLT M6 TITANIUM
BOLT M6 TITANIUM
Screw for Lower Shock Mount Titan Contains item 110274 1x
Price 7.90 EUR
Price incl. VAT
Plus shipping
Available
BOLT M5X15 TITANIUM
BOLT M5X15 TITANIUM
Titanium bottle cage screw
Price 3.90 EUR
Price incl. VAT
Plus shipping
Available
LOWER SHOCK MOUNT SET
LOWER SHOCK MOUNT SET
The mounting hardware is made of titanium and coated using the PVD process. This lower shock mount is compatible with all CLAY, COAL, GLEN, ASCO, CELOS, TARVO and CINTO models. Includes article 110274 + 110275 1x each
Price 19.90 EUR
Price incl. VAT
Plus shipping
Available
LOGOSHIRT (V4) - BLACK - WHITE PRINT - M
LOGOSHIRT (V4) - BLACK - WHITE PRINT - M
Our T-Sirts are made of organic cotton and printed in Germany.
Price 24.90 EUR
Price incl. VAT
Plus shipping
Not available
LOGOSHIRT (V4) - BLACK - WHITE PRINT - XXL
LOGOSHIRT (V4) - BLACK - WHITE PRINT - XXL
Price 24.90 EUR
Price incl. VAT
Plus shipping
Available
LOGOSHIRT (V4) - BLACK - WHITE PRINT - L
LOGOSHIRT (V4) - BLACK - WHITE PRINT - L
Price 24.90 EUR
Price incl. VAT
Plus shipping
Not available
LOGOSHIRT (V4) - BLACK - WHITE PRINT - XL
LOGOSHIRT (V4) - BLACK - WHITE PRINT - XL
Price 24.90 EUR
Price incl. VAT
Plus shipping
Not available
SHIM WASHER 14X0,5 MM
SHIM WASHER 14X0,5 MM
Contains the item 101870 1x
Price 0.90 EUR
Price incl. VAT
Plus shipping
Available
ASCO / CELOS ROCKERSET
ASCO / CELOS ROCKERSET
Rocker for ASCO and CELOS in 29er setup. The rocker is machined in Germany from the full and will be delivered ready for installation including the ball bearings from Enduro Bearings.
Price 499.00 EUR
Price incl. VAT
Plus shipping
Available
C-LOCK RING - SIZE 28 - SEALED
C-LOCK RING - SIZE 28 - SEALED
Contains C-LOCK RING SEALED with item number 111759 1x
Price 1.29 EUR
Price incl. VAT
Plus shipping
Available
STORAGE COVER SET - SIZE 175/180
STORAGE COVER SET - SIZE 175/180
Storage compartment lid for CELOS / ASCO / CINTO / TARVO (Superduty layup) in size 175/180. The storage compartment lid comes with a magnet, storage compartment nose and bottle holder screws.
Price 199.00 EUR
Price incl. VAT
Plus shipping
Available
MUDGUARD
MUDGUARD
Stick-on rubber protection to prevent foreign bodies from entering the space between the front and rear end.
Price 9.90 EUR
Price incl. VAT
Plus shipping
Available
STORAGE COVER SET - SIZE 185/190
STORAGE COVER SET - SIZE 185/190
Staufachdeckel für CELOS / ASCO / CINTO / TARVO (Superduty-Layup) in den Größe 185/190. Der Staufachdeckel kommt mit Magnet, Staufachnase und Flaschenhalterschrauben.
Price 199.00 EUR
Price incl. VAT
Plus shipping
Available
Magnet for storage compartment carbon frames
Magnet for storage compartment carbon frames
Replacement magnet for the storage compartment of our carbon frames
Price 4.90 EUR
Price incl. VAT
Plus shipping
Available
SHIM WASHER 14X0,8 MM
SHIM WASHER 14X0,8 MM
Contains 101868 1x
Price 0.90 EUR
Price incl. VAT
Plus shipping
Available
BOLT M14XP2,0
BOLT M14XP2,0
This Set contains the item 102233 1x
Price 9.90 EUR
Price incl. VAT
Plus shipping
Available
DOWNTUBE PROTECTOR SET TARVO/CINTO/ASCO/CELOS 195/200
DOWNTUBE PROTECTOR SET TARVO/CINTO/ASCO/CELOS 195/200
The Downtube Protector is delivered ready for installation, including adhesive film, and fits our carbon frames in sizes 195 and 200.
Price 129.00 EUR
Price incl. VAT
Plus shipping
Available
C-LOCKRING 26 ASCO/CELOS
C-LOCKRING 26 ASCO/CELOS
To secure the bearings in the rocker of the ASCO/CELOS (rocker seat stay) Includes item 111153 1x
Price 0.90 EUR
Price incl. VAT
Plus shipping
Available
UDH DERAILLEUR HANGER
UDH DERAILLEUR HANGER
Spare derailleur hanger for the UDH standard. Works with derailleurs from all brands that use the standard mounting position. Weight 27 g.
Price 14.90 EUR
Price incl. VAT
Plus shipping
Available
BEARING 10X26X8 - ENDURO MAX
BEARING 10X26X8 - ENDURO MAX
Enduro Bearings Max Black Oxide. Full-compound deep groove ball bearing sealed on both sides in the dimensions 10x26x8 mm. The Max Black Oxide bearings have a special coating to protect against rust. Required for the CELOS/ASCO seat stay - rocker connection Includes 111024 1x
Price 7.90 EUR
Price incl. VAT
Plus shipping
Available
DOWNTUBE PROTECTOR SET TARVO/CINTO/ASCO/CELOS 175/180
DOWNTUBE PROTECTOR SET TARVO/CINTO/ASCO/CELOS 175/180
The Downtube Protector is delivered ready for installation, including adhesive film, and fits our carbon frames in sizes 175 and 180.
Price 129.00 EUR
Price incl. VAT
Plus shipping
Available
CANE CREEK 40 SERIES
CANE CREEK 40 SERIES
The proven 40 from Cane Creek comes along with zinc flake coated bearings that protect against corrosion. This require little break-in time and feel rough at first ride Headset standard IS41/IS52. Height lower 1 mm, upper 9 mm. Weight 76g
Price 34.90 EUR
Price incl. VAT
Plus shipping
Available
ISCG 05 ADAPTER
ISCG 05 ADAPTER
This ISCG 05 adapter is placed under the bottom bracket cup where it engages with the frame interface. The adapter can be used to fit chain ring guards and chain devices that use the ISCG 05 hole pattern. Weight 21 g.
Price 29.90 EUR
Price incl. VAT
Plus shipping
Available
SHIM WASHER 14X0,2 MM
SHIM WASHER 14X0,2 MM
Contains item 110779 1x
Price 0.90 EUR
Price incl. VAT
Plus shipping
Available
DOWNTUBE PROTECTOR SET TARVO/CINTO/ASCO/CELOS 165/170
DOWNTUBE PROTECTOR SET TARVO/CINTO/ASCO/CELOS 165/170
The Downtube Protector is delivered ready for installation, including adhesive film, and fits our carbon frames in sizes 165 and 170.
Price 129.00 EUR
Price incl. VAT
Plus shipping
Available
DOWNTUBE PROTECTOR SET TARVO/CINTO/ASCO/CELOS 185/190
DOWNTUBE PROTECTOR SET TARVO/CINTO/ASCO/CELOS 185/190
The Downtube Protector is delivered ready for installation, including adhesive film, and fits our carbon frames in sizes 185 and 190.
Price 129.00 EUR
Price incl. VAT
Plus shipping
Available
BOLT M6X40 TITANIUM
BOLT M6X40 TITANIUM
For mounting brake calipers with 200/203 mm brake discs Contains item 110153 1x
Price 6.90 EUR
Price incl. VAT
Plus shipping
Available
BOLT M6X35 TITANIUM
BOLT M6X35 TITANIUM
For brake calipers with 200/203 mm brake discs as a short screw. Contains item 110152 1x
Price 6.90 EUR
Price incl. VAT
Plus shipping
Available
BOLT M6X20 TITANIUM
BOLT M6X20 TITANIUM
For mounting brake calipers with 180 mm brake discs. Contains Item 110151 1x
Price 6.90 EUR
Price incl. VAT
Plus shipping
Available
SHIM WASHER 14X1,0 MM
SHIM WASHER 14X1,0 MM
Contain 101869 1x
Price 0.90 EUR
Price incl. VAT
Plus shipping
Available
STORAGE COVER SET - SIZE 165/170
STORAGE COVER SET - SIZE 165/170
Storage compartment lid for CELOS / ASCO / CINTO / TARVO (Superduty layup) in size 165/170. The storage compartment lid comes with a magnet, storage compartment nose and bottle holder screws.
Price 199.00 EUR
Price incl. VAT
Plus shipping
Available
BOLT M10xP1,0xD26 ASCO/CELOS SEATSTAY TO ROCKER
BOLT M10xP1,0xD26 ASCO/CELOS SEATSTAY TO ROCKER
This set includes a screw to connect the rocker to the seatstay on ASCO and CELOS. This set includes item 110942 1x
Price 9.90 EUR
Price incl. VAT
Plus shipping
Available
BEARING SERVICE TOOL ASCO & CELOS
BEARING SERVICE TOOL ASCO & CELOS
With this tool you can press the bearings out and back in on ASCO and CELOS frames. This tool is suitable for the ASCO and CELOS models so that the bearings can be changed cleanly and easily.
Price 79.00 EUR
Price incl. VAT
Plus shipping
Available
STORAGE COVER SET - SIZE 195/200
STORAGE COVER SET - SIZE 195/200
Storage compartment lid for CELOS / ASCO / CINTO / TARVO (Superduty layup) in size 195/200. The storage compartment lid comes with a magnet, storage compartment nose and bottle holder screws.
Price 199.00 EUR
Price incl. VAT
Plus shipping
Available
CABLE INSERT 2 PIECES GLEN / COAL
CABLE INSERT 2 PIECES GLEN / COAL
For GLEN V2 and COAL V3 frames to route the rear brake cable and the shift cable housing through the top tube. Incl. screw Contains item 110272 1x
Price 9.90 EUR
Price incl. VAT
Plus shipping
Available
BOLT FOR SHOCK DIN 912 M8X40,7 -TITAN Gr.5
BOLT FOR SHOCK DIN 912 M8X40,7 -TITAN Gr.5
Bolt for lower shock mount on GLEN V03 and COAL V04 Includes 111732 1x
Price 9.90 EUR
Price incl. VAT
Plus shipping
Available
BOLT M15xP1,5
BOLT M15xP1,5
Includes 111630 1x
Price 9.90 EUR
Price incl. VAT
Plus shipping
Available
29
29" LINK GLEN (V03)
Link to drive the GLEN V03 with 29" rear wheel. Includes 111649 1x
Price 99.00 EUR
Price incl. VAT
Plus shipping
Available
CHAINSTAY PROTECTOR
CHAINSTAY PROTECTOR
Extra soft chainstay protection for our models GLEN V02 / V03 and COAL V03 / V04. Caution: This chainstay protector is only compatible with rear ends where the gear cable is routed internally, diagonally through the chainstay. Unfortunately, the protection is not compatible with the rear triangles of the GLEN V02 and COAL V03, where the shifter cable is routed externally under the griptape on the chainstay.
Price 24.90 EUR
Price incl. VAT
Plus shipping
Available
SPACER M10 TRUNNION (GLEN V3 & COAL V4)
SPACER M10 TRUNNION (GLEN V3 & COAL V4)
Contains the spacer for the trunnion mount with item number 111629 1x
Price 4.90 EUR
Price incl. VAT
Plus shipping
Available
BOLT-M10XP1,0 TRUNNION
BOLT-M10XP1,0 TRUNNION
Screw for trunion damper on GLEN V03 and COAL V04 Includes 111631 1x
Price 7.90 EUR
Price incl. VAT
Plus shipping
Available
CABLE INLET BB
CABLE INLET BB
Cable entry (bottom bracket) for shift cable and brake cable on GLEN V03 and COAL V04 Includes 111674 1x
Price 9.90 EUR
Price incl. VAT
Plus shipping
Available
MX LINK GLEN (V03)
MX LINK GLEN (V03)
Link to drive the GLEN V03 with 27.5" rear wheel. Includes 111651 1x
Price 99.00 EUR
Price incl. VAT
Plus shipping
Available
GLEN V3 ROCKERSET
GLEN V3 ROCKERSET
Rocker set for the GLEN V3 with 150 mm travel for Trunnion shocks with an installation length of 185x55mm. With this rocker set you can convert your COAL V04 into a GLEN V03 (only in conjunction with additional GLEN Link 112008 / 112007). The set is delivered ready for assembly including the ball bearings from Enduro Bearings, Trunnion Spacers and the sealed lockrings. Contains: 111654 & 111653 1x 111629 2x 111759 6x 101075 6x
Price 199.00 EUR
Price incl. VAT
Plus shipping
Available
CABLE INSERT 2 PIECES - NO HOLE GLEN / COAL
CABLE INSERT 2 PIECES - NO HOLE GLEN / COAL
Line insert for GLEN (V02 & V03) and COAL (V03 & V04) including screw. When using electronic shifting and electronic seat post. Includes item 111706
Price 9.90 EUR
Price incl. VAT
Plus shipping
Available
CABLE INSERT 2 PIECES - ONE HOLE GLEN / COAL
CABLE INSERT 2 PIECES - ONE HOLE GLEN / COAL
For GLEN V2 and COAL V3 frames to route the rear brake line through the top tube. Only when an wireless derailleur is used. Incl. screw
Price 9.90 EUR
Price incl. VAT
Plus shipping
Available
BEARING 10X22X6
BEARING 10X22X6
ENDURO 6900 LLU MAX BO Bearing Contains 102358 1x
Price 7.90 EUR
Price incl. VAT
Plus shipping
Available
MX LINK GLEN (V02)/COAL (V03)
MX LINK GLEN (V02)/COAL (V03)
With this link you can convert a GLEN (V02) or COAL (V03) into the MX-Version with a 27,5" rear wheel
Price 99.00 EUR
Price incl. VAT
Plus shipping
Available
BOLT M14XP2,0
BOLT M14XP2,0
Enthalten ist eine Schraube mit der Artikelnummer 102234
Price 9.90 EUR
Price incl. VAT
Plus shipping
Available
SPACER M10 REGULAR (TRUNNION)
SPACER M10 REGULAR (TRUNNION)
Contains the spacer for the trunnion-mount with item number 102249 1x
Price 4.90 EUR
Price incl. VAT
Plus shipping
Available
BEARING SERVICE TOOL COAL V3 & GLEN V2
BEARING SERVICE TOOL COAL V3 & GLEN V2
With this tool you can press the bearings out and back in on COAL V3 and GLEN V2 frames. This tool is suitable for the COAL V3 and GLEN V2 models so that the bearings can be changed cleanly and easily.
Price 99.00 EUR
Price incl. VAT
Plus shipping
Available
COAL V3 / GLEN V2 LINK FOR 29
COAL V3 / GLEN V2 LINK FOR 29" REAR WHEEL
With this link a GLEN MX (V02) or COAL MX (V03) can be converted into a 29" rear wheel
Price 99.00 EUR
Price incl. VAT
Plus shipping
Available
C-LOCK RING SIZE 22
C-LOCK RING SIZE 22
Articel contains item 110271 1x
Price 0.90 EUR
Price incl. VAT
Plus shipping
Available
COAL V3 ROCKERSET
COAL V3 ROCKERSET
Rocker set for the COAL V03 with 160 mm travel for Trunnion shocks with an installation length of 205x65 - with this rocker you can convert your GLEN V02 into a COAL V03. The set is delivered ready for assembly including the ball bearings from Enduro Bearings and trunnion screws.
Price 199.00 EUR
Price incl. VAT
Plus shipping
Available
BOLT-M10XP1,0
BOLT-M10XP1,0
Contains one screw with the article number 102285
Price 7.90 EUR
Price incl. VAT
Plus shipping
Available
DERAILLEUR HANGER - 148 MM
DERAILLEUR HANGER - 148 MM
Replacement Derailleur Hanger for 148 mm hubs. Fit's for: GLEN (V01), CLAY (V01 + V02), COAL (V01 + V02)
Price 24.90 EUR
Price incl. VAT
Plus shipping
Available
COAL V1 ROCKERSET
COAL V1 ROCKERSET
Rocker Set for the COAL V01 with 160 mm travel for shocks with the installation length 216x63. The set is supplied ready for installation incl. the ball bearings from Enduro Bearings.
Price 149.00 EUR
Price incl. VAT
Plus shipping
Available
ROCKER SET TARVO MX - 170 MM
ROCKER SET TARVO MX - 170 MM
TARVO rocker for the MX setup. The rocker is milled from solid material in Germany and delivered ready for assembly including the ball bearings and spacers from Enduro Bearings.
Price 399.00 EUR
Price incl. VAT
Plus shipping
Available
SPACER M10 THICK
SPACER M10 THICK
Spacer for the rocker at TARVO / CINTO (Seatstay) Includes item 110359 1x
Price 4.90 EUR
Price incl. VAT
Plus shipping
Available
CHAINSTAY PROTECTOR
CHAINSTAY PROTECTOR
The chainstay protector is compatible with all LAST carbon frames. The protector is delivered ready for installation.
Price 24.90 EUR
Price incl. VAT
Plus shipping
Available
BEARING SERVICE TOOL - TARVO & CINTO
BEARING SERVICE TOOL - TARVO & CINTO
With this tool you can press the bearings out and back in on TARVO and CINTO frames. This tool is suitable for the TARVO and CINTO models so that the bearings can be changed cleanly and easily.
Price 129.00 EUR
Price incl. VAT
Plus shipping
Available
ROCKER SET TARVO 29 - 160 MM - (new 8/2023)
ROCKER SET TARVO 29 - 160 MM - (new 8/2023)
TARVO rocker set for full 29 setup. The rocker is machined in Germany and comes with the bearings pressed in (Endurobearings) and washer. This is the new version launched in 08/2023 that is compatible with Rock Shox shocks that feature Hydraulic Bottom Out. The surface finish has been modified and is fine milled and anodized.
Price 399.00 EUR
Price incl. VAT
Plus shipping
Available
ROCKER SET GLEN V02
ROCKER SET GLEN V02
Rocker set for the GLEN V02 with 145 mm travel for metric shocks with an installation length of 210x55 - with this rocker you can convert your COAL V03 into a GLEN V02. The set is delivered ready for assembly including the ball bearings from Enduro Bearings and the titanium screw for the upper shock assembly.
Price 199.00 EUR
Price incl. VAT
Plus shipping
Available
CINTO ROCKERSET 29
CINTO ROCKERSET 29"
CINTO Rocker for the 29er setup. The rocker is milled in Germany and is delivered ready for assembly including the ball bearings from Enduro Bearings.
Price 399.00 EUR
Price incl. VAT
Plus shipping
Available
CINTO MX ROCKERSET
CINTO MX ROCKERSET
With the MX Rocker you can ride a 27.5" rear wheel in your CINTO. The rocker is milled from solid solid material in Germany and delivered ready for assembly including the ball bearings from Enduro Bearings.
Price 399.00 EUR
Price incl. VAT
Plus shipping
Available
FOX FLOAT X2 - FACTORY SERIES - 205x65
FOX FLOAT X2 - FACTORY SERIES - 205x65
The Float X2 Factory Series is characterized by its versatile adjustability and the low-friction Kashima coating. High- and low-speed rebound as well as high- and low-speed compression can be adjusted in open mode. With Fox, the rebound adjustment range is particularly wide - good for light riders. The easily accessible platform lever increases the low-speed compression damping for uphill riding. Individual adjustments to the spring characteristic are possible using volume spacers. The shock is supplied with a 0.3 cubic inch volume spacer and the Tune CM, RM, Rezi CM. The weight including the sleeves and the spacers is 654 g.
Price 699.00 EUR
Price incl. VAT
Plus shipping
Available
2023 FOX 36 PERFORMANCE 160 GRIP 3POS
2023 FOX 36 PERFORMANCE 160 GRIP 3POS
Serie Performance Offset 44mm Chassis Standard Laufradgröße 29 Federweg 160mm Dämpfer GRIP Druckstufeneinsteller 3 Position Farbe Matte Black Gabelschaft 1.5 Tapered Auf dem Produktbild ist die Federgabel mit Grip 2 Dämpfung abgebildet. Die Gabel wird jedoch mit Grip Dämpfung geliefert.
Price 469.00 EUR
Price incl. VAT
Plus shipping
Available
ROCK SHOX SUPER DELUXE SELECT+ - 205x65
ROCK SHOX SUPER DELUXE SELECT+ - 205x65
Model 2023 - The Superdeluxe Select+ impresses with its good function and easy adjustability. The platform (low speed compression) can be activated via the lever, which is easy to reach while riding. The rebound is also adjustable and the shock is supplied with the Tune 0L1 LNL1 38TS.
Price 349.00 EUR
Price incl. VAT
Plus shipping
Available
ROCK SHOX SUPER DELUXE ULTIMATE - LINEAR VERSION - 205x65
ROCK SHOX SUPER DELUXE ULTIMATE - LINEAR VERSION - 205x65
Model 2023 - The special feature of the Rock Shox Super Deluxe RC2T in the Ultimate version is the separately adjustable high- and low-speed compression. This considerably increases the adaptability of the shock to weight and riding style. The latest version of the linear DebonAir air chamber is installed, which offers a good compromise between bottoming out protection and utilization of the suspension travel. By flipping the easily accessible lever, you can switch on the platform for optimum performance on the climbs. Tune: 0L1 LNL1 Weight: 493 g
Price 449.00 EUR
Price incl. VAT
Plus shipping
Available
ROCK SHOX SIDLuxe ULTIMATE RL 210x50
ROCK SHOX SIDLuxe ULTIMATE RL 210x50
The XC-focused ROCK SHOX SIDLuxe ULTIMATE RL offers lightweight construction with maximum performance. The external rebound adjustment makes it easy to set up the right setup and the 2-position remote lever keeps the shock quiet for long uphills. Tune DB1 LL 430SS Attention the shock is sold without bushings!
Price 349.00 EUR
Price incl. VAT
Plus shipping
Available
FOX DHX2 - FACTORY SERIES - 185x55
FOX DHX2 - FACTORY SERIES - 185x55
The DHX2 offers a particularly fine response and thus provides a lot of grip. The full ride quality is maintained even on long descents, as there is no air chamber in which the air heats up and causes the shock to harden. Coil shocks are also low-maintenance, as there is no need to service the air chamber and the air pressure does not need to be checked. With this shock, high and low-speed rebound as well as high and low-speed compression can be adjusted in open mode. The easily accessible platform lever increases the low-speed compression for uphill riding. This shock is not supplied with a spring, this must be purchased separately
Price 549.00 EUR
Price incl. VAT
Plus shipping
Available
ROCK SHOX DELUXE ULTIMATE - LINEAR VERSION - 210x55
ROCK SHOX DELUXE ULTIMATE - LINEAR VERSION - 210x55
Model 2023 - The RockShox Deluxe Ultimate RCT shock is equipped with DebonAir+ air suspension. In addition to the low-speed compression setting, it offers a 2-position lever for quick switching to a pedal-efficient mode on the move. Tune 0L1 LNL1 ATTENTION: The shock is sold without bushings.
Price 399.00 EUR
Price incl. VAT
Plus shipping
Available
Newmen Evolution SL A.30 - 29 - SRAM kompatibel
Newmen Evolution SL A.30 - 29 - SRAM kompatibel
The Evolution SL A.30 wheelset from Newmen boasts a robust rim with an inner width of 30 mm and a finely toothed freewheel (36 teeth). The weight is sensationally low for the approved range of use from enduro to trail. Approved for a system weight of 125 kg. Weight 1783 g.
Price 499.00 EUR
Price incl. VAT
Plus shipping
Available
2024 FOX 38 PERFORMANCE 180 GRIP 3POS
2024 FOX 38 PERFORMANCE 180 GRIP 3POS
Series Performance Offset 44mm Chassis Standard Wheel size 29 Suspension travel 160mm Shock GRIP Compression adjuster 3 position Color Matte Black Fork steerer 1.5 Tapered The product picture shows the suspension fork with Grip 2 damping. However, the fork is supplied with Grip damping.
Price 499.00 EUR
Price incl. VAT
Plus shipping
Available
ROCK SHOX SUPER DELUXE ULTIMATE - LINEAR VERSION - 210x55
ROCK SHOX SUPER DELUXE ULTIMATE - LINEAR VERSION - 210x55
Model 2023 - The ultimate version of the Rock Shox Superdeluxe air shock in the linear version with the Tune 1L0 LNL1. For a super plush response, Rock Shox uses only the best oils and specifies the latest technologies. By flipping the easily accessible lever, you can switch on the platform for optimum performance on climbs. The shock offers you great riding characteristics with the advantages of a variably adjustable air chamber - so you can always find the right setup! Weight: 485g ATTENTION: The shock is sold without bushings.
Price 499.00 EUR
Price incl. VAT
Plus shipping
Available
FOX 36 - FACTORY SERIES- GRIP2 - 160 mm
FOX 36 - FACTORY SERIES- GRIP2 - 160 mm
The 36 Factory Series from Fox impresses with its butter-soft response thanks to sophisticated axle clamping, precise manufacturing manufacturing and the low-friction Kashima coating. The Grip2 damper offers unique adjustment options: High- and low-speed compression and high- and low-speed rebound. Thanks to the comprehensive and well-fitting tuning guide, the fork is quickly adjusted. The progression can be adjusted using volume spacers can be adjusted. The fork has a matt black finish and a quick release. The offset is 44mm.
Price 749.00 EUR
Price incl. VAT
Plus shipping
Available
2022 FOX 38 FACTORY 170 GRIP2
2022 FOX 38 FACTORY 170 GRIP2
Series Factory Offset 44mm Chassis Standard Wheel size 29 Suspension travel 170mm Shock GRIP2 Color Matte Black Fork steerer 1.5 Tapered
Price 799.00 EUR
Price incl. VAT
Plus shipping
Available
2024 FOX 34 PERFORMANCE 140 GRIP 3POS
2024 FOX 34 PERFORMANCE 140 GRIP 3POS
Performance series Offset 44mm Cassis standard Wheel size 29" Damper GRIP Compression adjuster 3 positions Color Matte Black Steerer tube 1.5" tapered
Price 449.00 EUR
Price incl. VAT
Plus shipping
Available
Newmen Evolution SL A.30 - 29 - Shimano compatible
Newmen Evolution SL A.30 - 29 - Shimano compatible
The Evolution SL A.30 wheelset from Newmen boasts a robust rim with an inner width of 30 mm and a finely toothed freewheel (36 teeth). The weight is sensationally low for the approved range of use from enduro to trail. Approved for a system weight of 125 kg. Weight 1783 g.
Price 499.00 EUR
Price incl. VAT
Plus shipping
Available
FOX FLOAT X - FACTORY SERIES - 185x55
FOX FLOAT X - FACTORY SERIES - 185x55
The Float X impresses with its light weight, the particularly low-friction Kashima coating and the easily accessible, tool-free adjustment options. The low-speed compression adjustment is divided into 12 numbered positions. As is typical for Fox, the rebound adjustment range is particularly wide - good for light riders. If you wish, you can also increase the low-speed compression damping via the 2-position lever for uphill riding. The switchable platform is realized via a separate oil circuit and is very effective. The shock is supplied with a 0.3 cubic inch volume spacer and the adapted Tune CL, RM, Rezi LF. The weight including the sleeves and the spacers is 514 g. ATTENTION: The shock is sold without bushings.
Price 399.00 EUR
Price incl. VAT
Plus shipping
Available
2022 FOX FLOAT DPS - FACTORY SERIES - 3POS 210x50
2022 FOX FLOAT DPS - FACTORY SERIES - 3POS 210x50
FLOAT shocks with Dual Piston System (DPS) with twin pistons offer three quick settings (open, medium and firm) that allow the rider to adjust the damping behavior to almost any terrain. The valve design allows total lockout of the shock without compromising response, control and efficiency. The Factory series shocks have an additional low-speed compression adjustment in open mode with 3 clicks. Weight: 295g
Price 349.00 EUR
Price incl. VAT
Plus shipping
Available
ROCK SHOX SUPER DELUXE ULTIMATE - PROGRESSIVE VERSION - 210x55
ROCK SHOX SUPER DELUXE ULTIMATE - PROGRESSIVE VERSION - 210x55
Model 2023 - The ultimate version of the Rock Shox Superdeluxe air shock in the progressive version with the Tune 0P0 LNL1. Rock Shox uses only the best oils and specifies the latest technologies for super plush response behaviour. By flipping the easily accessible lever, you can switch on the platform for optimum uphill performance. The shock offers you super riding characteristics with the advantages of a variably adjustable air chamber - so you can always find the right setup! Weight: 485g ATTENTION: The shock is sold without bushings. Translated with DeepL.com (free version)
Price 399.00 EUR
Price incl. VAT
Plus shipping
Available
FOX FLOAT X - PERFORMANCE SERIES - 205x65
FOX FLOAT X - PERFORMANCE SERIES - 205x65
The Float X impresses with its light weight and simple operation. As is typical for Fox, the rebound adjustment range is particularly wide - good for light riders. The selectable platform, via the 2-position lever, is very effective for uphill riding. The shock is supplied with a 0.1 cubic inch volume spacer and the Tune CL, RL, Rezi LFB3 and weighs 506 g including the sleeves and spacers.
Price 279.00 EUR
Price incl. VAT
Plus shipping
Available
ROCK SHOX SUPER DELUXE ULTIMATE COIL HYDRAULIC BOTTOM-OUT - 210x55
ROCK SHOX SUPER DELUXE ULTIMATE COIL HYDRAULIC BOTTOM-OUT - 210x55
The new Super Deluxe Coil Ultimate is a shock for those looking for maximum downhill performance. Equipped with 100% independent high-speed and low-speed compression adjustment, the shock provides better handling on small bumps and has an optional adjustable hydraulic bottom-out to customise the bottomless feel to your preferences. Tune LNL HB 320SS This shock does not come with a spring, this must be purchased separately ATTENTION: The shock is sold without bushings.
Price 449.00 EUR
Price incl. VAT
Plus shipping
Available
2024 FOX 36 FACTORY 160 GRIP2
2024 FOX 36 FACTORY 160 GRIP2
Series Factory Offset 44mm Chassis Standard Wheel size 29 Suspension travel 160mm Shock GRIP2 Color Matte Black Fork steerer 1.5 Tapered
Price 749.00 EUR
Price incl. VAT
Plus shipping
Available
ROCK SHOX PIKE ULTIMATE 140
ROCK SHOX PIKE ULTIMATE 140
Offset 44mm Wheel size 29 Travel 140mm Damper Charger 3 RC2 / ButterCups Color Matte Black Fork steerer 1.5 Tapered
Price 669.00 EUR
Price incl. VAT
Plus shipping
Available
ROCK SHOX LYRIK ULTIMATE 160
ROCK SHOX LYRIK ULTIMATE 160
Offset 44mm Wheel size 29 Travel 160mm Damper Charger 3 RC2 / ButterCups Color Glossy Black Fork steerer 1.5 Tapered
Price 699.00 EUR
Price incl. VAT
Plus shipping
Available
ROCK SHOX SUPER DELUXE SELECT+ RT - LINEAR VERSION - 210x55
ROCK SHOX SUPER DELUXE SELECT+ RT - LINEAR VERSION - 210x55
Model 2023 - The Superdeluxe Select+ version of the Rock Shox Superdeluxe air shock in the linear version with the Tune 0L1 LNL1. Rock Shox uses only the best oils for a super plush response. By flipping the easily accessible lever, you can switch on the platform for optimum uphill performance. ATTENTION: The shock is sold without bushings.
Price 349.00 EUR
Price incl. VAT
Plus shipping
Available
ROCK SHOX LYRIK SELECT+ 160
ROCK SHOX LYRIK SELECT+ 160
Offset 44mm Wheel size 29 Suspension travel 160mm Damper Charger 3 RC2 Color Matte Black Fork steerer 1.5 Tapered
Price 579.00 EUR
Price incl. VAT
Plus shipping
Available
Newmen Advanced SL A.30 - 29 - Sram kompatibel
Newmen Advanced SL A.30 - 29 - Sram kompatibel
The Advanced SL A.30 wheelset uses a newly developed Newmen carbon rim with an internal width of 30 mm. The finely toothed Fade freewheel with 36 teeth is also used. As with its aluminum counterpart, the weight is sensationally low for the intended range of use from enduro to trail. Approved for a system weight of 125 kg. 6-hole mount for brake discs. XD freewheel. Weight 1617 g.
Price 899.00 EUR
Price incl. VAT
Plus shipping
Available
Newmen Advanced SL A.30 - 29 - Shimano kompatibel
Newmen Advanced SL A.30 - 29 - Shimano kompatibel
The Advanced SL A.30 wheelset uses a newly developed Newmen carbon rim with an internal width of 30 mm. The finely toothed Fade freewheel with 36 teeth is also used. As with its aluminum counterpart, the weight is sensationally low for the intended range of use from enduro to trail. Approved for a system weight of 125 kg. 6-hole mount for brake discs. MicroSpline freewheel. Weight 1617 g.
Price 899.00 EUR
Price incl. VAT
Plus shipping
Available
ROCK SHOX SUPER DELUXE ULTIMATE - PROGRESSIVE VERSION - 205x65
ROCK SHOX SUPER DELUXE ULTIMATE - PROGRESSIVE VERSION - 205x65
Model 2023 - With the Ultimate version, we offer you the top version of the Rock Shox Superdeluxe air damper in the progressive version 1P0 LNL1. For a super plush response, Rock Shox uses only the best oils and specifies the latest technologies. By flipping the easily accessible lever, you can switch on the platform for optimum uphill performance. The shock offers you super riding characteristics with the advantages of variably adjustable air
Price 399.00 EUR
Price incl. VAT
Plus shipping
Available
FOX FLOAT X - FACTORY SERIES - 205x65
FOX FLOAT X - FACTORY SERIES - 205x65
The Float X impresses with its light weight, the particularly low-friction Kashima coating and the easily accessible, tool-free adjustment options. The low-speed compression adjustment is divided into 12 numbered positions. As is typical for Fox, the rebound adjustment range is particularly wide - good for light riders. If you wish, you can also increase the low-speed compression damping via the 2-position lever for uphill riding. The switchable platform is realized via a separate oil circuit and is very effective. The shock is supplied with a 0.3 spacer and the Tune CL, RL, Rezi LFB3.
Price 399.00 EUR
Price incl. VAT
Plus shipping
Available
ROCK SHOX PIKE SELECT+ 140
ROCK SHOX PIKE SELECT+ 140
Offset 44mm Wheel size 29 Travel 160mm Damper Charger 3 RC2 Color Matte Black Fork steerer 1.5 Tapered
Price 539.00 EUR
Price incl. VAT
Plus shipping
Available
2022 FOX 36 RHYTHM 160 GRIP
2022 FOX 36 RHYTHM 160 GRIP
Rhythm series Offset 44mm Chassis Standard Wheel size 29 Suspension travel 160mm Shock GRIP Compression adjuster Sweep-Adjust Color Matte Black Fork steerer 1.5 Tapered
Price 399.00 EUR
Price incl. VAT
Plus shipping
Available
FOX DHX2 - FACTORY SERIES - 210x55
FOX DHX2 - FACTORY SERIES - 210x55
The DHX2 offers a particularly fine response and thus provides a lot of grip. The full ride quality is maintained even on long descents, as there is no air chamber in which the air heats up and causes the shock to harden. Coil shocks are also low-maintenance, as there is no need to service the air chamber and the air pressure does not need to be checked. With this shock, high and low-speed rebound as well as high and low-speed compression can be adjusted in open mode. The easily accessible platform lever increases the low-speed compression. This shock is not supplied with a spring, this must be purchased separately
Price 499.00 EUR
Price incl. VAT
Plus shipping
Available
MX LINK COAL (V04)
MX LINK COAL (V04)
Link to ride the COAL V04 with 27.5" rear wheel. Includes 111652 1x
Price 99.00 EUR
Price incl. VAT
Plus shipping
Available
COAL V4 ROCKERSET
COAL V4 ROCKERSET
Rocker set for the COAL V04 with 165 mm travel for Trunnion shocks with an installation length of 185x55mm. With this rocker set you can convert your GLEN V03 into a COAL V04 (only in conjunction with additional COAL Link 112009 / 112010). Please note: Conversion to COAL 29" is only possible in sizes 185 & 195! As an MX version, you can convert your GLEN to COAL in all sizes. The set is delivered ready for assembly including the ball bearings from Enduro Bearings, Trunnion Spacers and the sealed lockrings. Includes: 111656 & 111655 1x 111629 2x 111759 6x 101075 6x
Price 199.00 EUR
Price incl. VAT
Plus shipping
Available
29
29" LINK COAL (V04)
Link to ride the COAL V04 with 29" rear wheel. Please note: The COAL can only be used with a 29" rear wheel in sizes 185 & 195. Includes 111650 1x
Price 99.00 EUR
Price incl. VAT
Plus shipping
Available
Derailleur hanger for FASTFORWARD / TREMONIA
Derailleur hanger for FASTFORWARD / TREMONIA
Replacement derailleur hanger for our steel hardtails FASTFORWARD and TREMONIA.
Price 19.90 EUR
Price incl. VAT
Plus shipping
Available