Link for the CLAY V1 and V2 for shocks with the installation length 210x55.

The through axle we developed has a conical tip as a threading aid. It is operated with an Allen key. We recommend this axle for riders over 80 kg and for all riders who put extreme strain on your bike. This axle is suitable for riders with a weight of 90 kg or more necessary. Weight: 46g

Enduro Bearings Max Black Oxide. Fully spherical, deep groove ball bearing sealed on both sides in the dimensions 28x15x7 mm. The Max Black Oxide bearings have a special coating to protect against rust. Item contains 1x 110716

Sleeve mounting hardware for lower shock mount Contains item 110275 1x

Rocker Set for the CLAY V01 and V02 with 140 mm travel for shocks with the installation length 210x55. The set is supplied ready for installation incl. the ball bearings from Enduro Bearings and trunnion bolts.

Link for the COAL V1 for shocks with the installation length 216x63. Link for the COAL V2 for shocks with the installation length 210x55.

For CLAY (V01/V02), GLEN (V01/V02) and COAL (V01/V02/V03) frames to run the cable of the rear brake and the shift cable housing through the rear frame (GLEN V02 and COAL V03), as well as the seat post cable through the main frame (all versions).

Replacement Derailleur Hanger for 148 mm hubs. Fit's for: GLEN (V01), CLAY (V01 + V02), COAL (V01 + V02)

The Cane Creek preload kit matches the style of the 40 series head set. Weight 27 g.

Rocker Set for the COAL V01 with 160 mm travel for shocks with the installation length 210x55. The set is supplied ready for installation incl. the ball bearings from Enduro Bearings and trunnion bolts.

Enduro Bearings Max Type. Fully spherical, rust-proof deep groove ball bearing sealed on both sides in the dimensions 28x15x7 mm. Specially designed for use in full suspension frames and fully filled with water resistant grease. Item contains 1x 101075

Contains C-LOCK RING ROTORCLIP with item number 102362 1x

Zur Sicherung der Hauptlager im Rocker (GLEN/COAL/CELOS/ASCO/CINTO/TARVO) Beinhaltet den Artikel 101873 1x

Screw for Lower Shock Mount Titan Contains item 110274 1x

Titanium bottle cage screw

The mounting hardware is made of titanium and coated using the PVD process. This lower shock mount is compatible with all CLAY, COAL, GLEN, ASCO, CELOS, TARVO and CINTO models. Includes article 110274 + 110275 1x each

Our T-Sirts are made of organic cotton and printed in Germany.

Contains the item 101870 1x

Rocker for ASCO and CELOS in 29er setup. The rocker is machined in Germany from the full and will be delivered ready for installation including the ball bearings from Enduro Bearings.

Storage compartment lid for CELOS / ASCO / CINTO / TARVO (Superduty layup) in size 175/180. The storage compartment lid comes with a magnet, storage compartment nose and bottle holder screws.

Stick-on rubber protection to prevent foreign bodies from entering the space between the front and rear end.

Staufachdeckel für CELOS / ASCO / CINTO / TARVO (Superduty-Layup) in den Größe 185/190. Der Staufachdeckel kommt mit Magnet, Staufachnase und Flaschenhalterschrauben.

Replacement magnet for the storage compartment of our carbon frames

Contains 101868 1x

This Set contains the item 102233 1x

The Downtube Protector is delivered ready for installation, including adhesive film, and fits our carbon frames in sizes 195 and 200.

To secure the bearings in the rocker of the ASCO/CELOS (rocker seat stay) Includes item 111153 1x

Spare derailleur hanger for the UDH standard. Works with derailleurs from all brands that use the standard mounting position. Weight 27 g.

The Downtube Protector is delivered ready for installation, including adhesive film, and fits our carbon frames in sizes 175 and 180.

The proven 40 from Cane Creek comes along with zinc flake coated bearings that protect against corrosion. This require little break-in time and feel rough at first ride Headset standard IS41/IS52. Height lower 1 mm, upper 9 mm. Weight 76g

Contains item 110779 1x

The Downtube Protector is delivered ready for installation, including adhesive film, and fits our carbon frames in sizes 165 and 170.

The Downtube Protector is delivered ready for installation, including adhesive film, and fits our carbon frames in sizes 185 and 190.

This ISCG 05 adapter is placed under the bottom bracket cup where it engages with the frame interface. The adapter can be used to fit chain ring guards and chain devices that use the ISCG 05 hole pattern. Weight 21 g.

For mounting brake calipers with 200/203 mm brake discs Contains item 110153 1x

For brake calipers with 200/203 mm brake discs as a short screw. Contains item 110152 1x

For mounting brake calipers with 180 mm brake discs. Contains Item 110151 1x

Contain 101869 1x

Bolt for upper Shock Mount CELOS, ASCO & GLEN Beeinhaltet Artikel 102359 1x

Storage compartment lid for CELOS / ASCO / CINTO / TARVO (Superduty layup) in size 165/170. The storage compartment lid comes with a magnet, storage compartment nose and bottle holder screws.

This set includes a screw to connect the rocker to the seatstay on ASCO and CELOS. This set includes item 110942 1x

Storage compartment lid for CELOS / ASCO / CINTO / TARVO (Superduty layup) in size 195/200. The storage compartment lid comes with a magnet, storage compartment nose and bottle holder screws.

ENDURO 6900 LLU MAX BO Bearing Contains 102358 1x

For GLEN V2 and COAL V3 frames to route the rear brake cable and the shift cable housing through the top tube. Incl. screw Contains item 110272 1x

With this link you can convert a GLEN (V02) or COAL (V03) into the MX-Version with a 27,5" rear wheel

Enthalten ist eine Schraube mit der Artikelnummer 102234

Contains the spacer for the trunnion-mount with item number 102249 1x

Extra soft chainstay protection for our models GLEN V02 and COAL V03. Caution: This chainstay protector is only compatible with rear ends where the gear cable is routed internally, diagonally through the chainstay. Unfortunately, the protection is not compatible with the rear triangles of the GLEN V02 and COAL V03, where the shifter cable is routed externally under the griptape on the chainstay.

With this link a GLEN MX (V02) or COAL MX (V03) can be converted into a 29" rear wheel

Articel contains item 110271 1x

Rocker set for the COAL V03 with 160 mm travel for Trunnion shocks with an installation length of 205x65 - with this rocker you can convert your GLEN V02 into a COAL V03. The set is delivered ready for assembly including the ball bearings from Enduro Bearings and trunnion screws.

Contains one screw with the article number 102285

For GLEN V2 and COAL V3 frames to route the rear brake line through the top tube. Only when an wireless derailleur is used. Incl. screw

Rocker Set for the COAL V01 with 160 mm travel for shocks with the installation length 216x63. The set is supplied ready for installation incl. the ball bearings from Enduro Bearings.

TARVO rocker set for full 29 setup. The rocker is machined in Germany and comes with the bearings pressed in (Endurobearings) and washer. This is the new version launched in 08/2023 that is compatible with Rock Shox shocks that feature Hydraulic Bottom Out. The surface finish has been modified and is fine milled and anodized. Probably the raw finish is a one off limited edition.

TARVO rocker for the MX setup. The rocker is milled from solid material in Germany and delivered ready for assembly including the ball bearings and spacers from Enduro Bearings.

Spacer for the rocker at TARVO / CINTO (Seatstay) Includes item 110359 1x

The chainstay protector is compatible with all LAST carbon frames. The protector is delivered ready for installation.

TARVO rocker set for full 29 setup. The rocker is machined in Germany and comes with the bearings pressed in (Endurobearings) and washer. This is the new version launched in 08/2023 that is compatible with Rock Shox shocks that feature Hydraulic Bottom Out. The surface finish has been modified and is fine milled and anodized.

Rocker set for the GLEN V02 with 145 mm travel for metric shocks with an installation length of 210x55 - with this rocker you can convert your COAL V03 into a GLEN V02. The set is delivered ready for assembly including the ball bearings from Enduro Bearings and the titanium screw for the upper shock assembly.

CINTO Rocker for the 29er setup. The rocker is milled in Germany and is delivered ready for assembly including the ball bearings from Enduro Bearings.

With the MX Rocker you can ride a 27.5" rear wheel in your CINTO. The rocker is milled from solid solid material in Germany and delivered ready for assembly including the ball bearings from Enduro Bearings.

The NEWMEN Evolution SL A. is a high-end aluminium wheelset. This wheels set is suitable for all mountain and enduro use. Application: All Mountain, Enduro Wheel Size: 29" Tyre Type: clincher tyre Number of Spokes: 28 Brake Type: 6-bolt disc Wheel Standard: Boost Tubeless System: Tubeless Ready Technical Information - Rim: Type: Evolution SL A.30 Dimensions (ETRTO): 30-622 Inner Width: 30 mm Depth: 20 mm ERD: 622 mm Valve Hole Diameter: SV / Presta (6.5 mm) Rim Material: aluminium Technical Information - Front Hub: Type: NEWMEN FADE Straightpull Axle style: 15 x 110 mm thru-axle Bearings: 2 deep groove ball bearings Body Material: aluminium Technical Information - Rear Hub: Type: NEWMEN FADE Straightpull Axle style: 12 x 148 mm thru-axle Bearings: 4 deep groove ball bearings Body Material: aluminium Freehub Body Material: aluminium Freehub Body: 3 pawls, 36 tooth pitch Technical Information - Lacing: Lacing Pattern: 3-cross Spoke Type: Sapim D-Light Weight Limit: 125 kg (system weight) Air Pressure (max.): 2.4 bar Recommended Tyre Width: 2.3 - 2.5" Features: high-end All Mountain aluminium wheelset hand-assembled in Germany high-strength aluminium alloy tubeless compatible hookless design required rim tape 30 - 34 mm Featured Technologies: MG-Washer: The weak point of aluminium or carbon rims, the nipple holes in the rim, is reinforced with an MG washer at NEWMEN. This is the solution with the least amount of material used, so that there is practically no effect on weight. The MG-Washer is concave on both sides. This means that it can be installed in both directions, and the contact surface on the rim side moves away from the nipple hole of the rim, thus providing additional relief. Another advantage is the even friction between nipple and washer, which prevents the nipple from " eating". Rounded Rim Profile: The rounded rim profile has flared rim flanges with optimised flange height and wall thickness. The wall thickness on the rim flange has been increased, in the side area reduced. The flared rim flanges shorten the distance between left and right rim flange, which saves material and weight. The tyre can also take on a rounder shape, improving comfort and cornering grip. Colour: Rim: black w/ grey decals Hub: black Spokes: black Nipples: black Models: 29" set (front 15x110 + rear 12x148) SRAM XD: Freehub: SRAM XD Gearing: 11-/12-speed Manufacturer Number: 90433 + 90434 29" set (front 15x110 + rear 12x148) Shimano Micro Spline: Freehub: Shimano Micro Spline Gearing: 12-speed Manufacturer Number: 90433 + 90435 29" set (front 15x110 + rear 12x148) Shimano: Freehub: Shimano MTB Gearing: 8-/9-/10-/11-speed Manufacturer Number: 90433 + 90436 Contents: 1 x NEWMEN Evolution SL A.30 Fade wheelset (front and rear wheel) Condition of the product: The product is new, never used and free from any defects. Weight: 1780 g (weight announced by the brand, indicative) Newmen Art.: 90633, 90634 EAN: 4054571185129; 4054571185143

The NEWMEN Evolution SL A.30 is a high-end wheelset with high quality aluminum rim. The wheelset is suitable for all-mountain and enduro use. Application: All Mountain, Enduro Wheel size: front wheel 29 "/ rear wheel 27.5 " Tire type: clincher / folding tire Number of spokes: 28 Brake system: Disc 6-bolt Wheel standard: Boost Tubeless system: Tubeless Ready Technical data of the rims: Type: Evolution SL A.30 Dimension (ETRTO): Front wheel 30-622/Rear wheel 30-557 Rim width inside: 30 mm Rim height: 20 mm ERD: front wheel 622 mm/rear wheel 557mm Valve hole (diameter): SV (6.5 mm) Material rim: aluminum Technical data front wheel hub: Type: NEWMEN FADE Straightpull Installation width: 15 x 110 mm thru axle Bearing: 2 deep groove ball bearings Hub body material: aluminum Technical data rear hub: Type: NEWMEN FADE Straightpull Installation width: 12 x 148 mm thru axle Freewheel: SRAM XD Bearing: 4 deep groove ball bearings Material hub body: aluminum Material freewheel body: aluminum Freewheel system: 3 pawls, 36 tooth pitch Technical data lacing: 3-fold crossed Spoke type: Sapim D-Light Approvals: Weight limit: 125 kg system weight Max. air pressure: 2.4 bar Recommended tire width: 2.3 - 2.5" Features: High-end all-mountain aluminum wheelset handmade in Germany high-strength aluminum alloy tubeless capable hookless design required rim tape 30 - 34 mm Special Highlights: MG Washer: The weak point of aluminum or carbon rims, the nipple holes in the rim, is reinforced at NEWMEN with an MG-Washer. This is the solution that uses the least amount of material, so there is virtually no weight impact. The MG washer is concave on both sides. This means that it can be installed in both directions. In addition, the contact surface on the rim side moves away from the nipple hole of the rim and additionally relieves the rim. Another advantage is the uniform friction between nipple and washer, which prevents the " seizing" of the nipple. Rim profile without edges and corners: The rim profile without edges and corners has flared rim flanks with optimized horn height and wall thickness. The wall thickness has been increased at the rim flange and reduced at the sides. The flared rim flanks shorten the distance between the left and right rim flanges, which saves material and thus weight. Since the tire can also take on a rounder shape, comfort and cornering grip are improved. Color: Rim: black with gray decals Hub: black Spokes: black nipple: black Scope of delivery: 1 x wheelset NEWMEN Evolution SL A.30 FADE (front wheel and rear wheel) Item condition: The item is new, unused and free of damage. Weight: 1780 g (manufacturer's specification without guarantee). Manufacturer Part No.: front wheel 90633, rear wheel 90638 The picture shows the wheelset in the 29" variant. Supplied is the wheelset with 29 "front wheel and 27.5 "rear wheel.

The EXC 1200 Spline wheelset combines reliability with low weight. The new Ratchet EXP freewheel system is particularly finely toothed and the lightweight carbon rim (30 mm Inner width) reduces the inertia noticeably. Released is the Enduro wheelset for ASTM category 4 and 130 kg system weight. Weight 1670 g. Wheel size: 29 Freewheel: SRAM XD Freewheel body: Ratchet EXP 36 Material rim: Carbon Inner width: 30mm Outer width: 36mm Rim height: 25mm Number of holes/spokes: 28 Hub type: 180 Axles: Front wheel: 15 x 110mm / Rear wheel: 12 x 148mm Valve hole: Presta Brake disc mount: IS 6-bolt Spokes: Front wheel: DT aerolite® straightpull / rear wheel: DT aero comp® straightpull Nipple: DT ProLock Squorx ProHead alu Lacing: Three-cross (1:1)

The XMC 1501 Spline One wheelset combines reliability with low weight. The new Ratchet EXP freewheel system is particularly finely toothed and the lightweight carbon rim (30 mm Inner width) reduces the inertia noticeably. Released is the All-Mountain wheelset for ASTM category 4 and 120 kg system weight. Weight 1667 g. Wheel size: 29 " Freewheel: SRAM XD Freewheel body: Ratchet EXP 36 Material rim: Carbon Inner width: 30mm Outer width: 36mm Rim height: 25mm Number of holes/spokes: 28 Hub type: 240 Axles: Front wheel: 15 x 110mm / Rear wheel: 12 x 148mm Valve hole: Presta Brake disc mount: IS 6-hole Spokes: Front wheel: DT competition® race straightpull / Rear wheel: DT competition® race straightpull Nipple: DT ProLock Squorx ProHead alu Lacing: Three-cross (1:1)

The NEWMEN Evolution SL A. is a high-end aluminium wheelset. This wheels set is suitable for all mountain and enduro use. Application: All Mountain, Enduro Wheel Size: 29" Tyre Type: clincher tyre Number of Spokes: 28 Brake Type: 6-bolt disc Wheel Standard: Boost Tubeless System: Tubeless Ready Technical Information - Rim: Type: Evolution SL A.30 Dimensions (ETRTO): 30-622 Inner Width: 30 mm Depth: 20 mm ERD: 622 mm Valve Hole Diameter: SV / Presta (6.5 mm) Rim Material: aluminium Technical Information - Front Hub: Type: NEWMEN FADE Straightpull Axle style: 15 x 110 mm thru-axle Bearings: 2 deep groove ball bearings Body Material: aluminium Technical Information - Rear Hub: Type: NEWMEN FADE Straightpull Axle style: 12 x 148 mm thru-axle Bearings: 4 deep groove ball bearings Body Material: aluminium Freehub Body Material: aluminium Freehub Body: 3 pawls, 36 tooth pitch Technical Information - Lacing: Lacing Pattern: 3-cross Spoke Type: Sapim D-Light Weight Limit: 125 kg (system weight) Air Pressure (max.): 2.4 bar Recommended Tyre Width: 2.3 - 2.5" Features: high-end All Mountain aluminium wheelset hand-assembled in Germany high-strength aluminium alloy tubeless compatible hookless design required rim tape 30 - 34 mm Featured Technologies: MG-Washer: The weak point of aluminium or carbon rims, the nipple holes in the rim, is reinforced with an MG washer at NEWMEN. This is the solution with the least amount of material used, so that there is practically no effect on weight. The MG-Washer is concave on both sides. This means that it can be installed in both directions, and the contact surface on the rim side moves away from the nipple hole of the rim, thus providing additional relief. Another advantage is the even friction between nipple and washer, which prevents the nipple from " eating". Rounded Rim Profile: The rounded rim profile has flared rim flanges with optimised flange height and wall thickness. The wall thickness on the rim flange has been increased, in the side area reduced. The flared rim flanges shorten the distance between left and right rim flange, which saves material and weight. The tyre can also take on a rounder shape, improving comfort and cornering grip. Colour: Rim: black w/ grey decals Hub: black Spokes: black Nipples: black Models: 29" set (front 15x110 + rear 12x148) SRAM XD: Freehub: SRAM XD Gearing: 11-/12-speed Manufacturer Number: 90433 + 90434 29" set (front 15x110 + rear 12x148) Shimano Micro Spline: Freehub: Shimano Micro Spline Gearing: 12-speed Manufacturer Number: 90433 + 90435 29" set (front 15x110 + rear 12x148) Shimano: Freehub: Shimano MTB Gearing: 8-/9-/10-/11-speed Manufacturer Number: 90433 + 90436 Contents: 1 x NEWMEN Evolution SL A.30 Fade wheelset (front and rear wheel) Condition of the product: The product is new, never used and free from any defects. Weight: 1780 g (weight announced by the brand, indicative) Newmen Art.: 90633, 90635 EAN: 4054571185129; 4054571185143

Replacement derailleur hanger for our steel hardtails FASTFORWARD and TREMONIA.