Detail:

Extension:

Catekorie:

TEST: 1

Rocker Set TARVO MX - 170mm
Rocker Set TARVO MX - 170mm
With the MX Rocker you can ride a 27.5 inch rear wheel in your TARVO. The rocker is milled in Germany and comes ready to mount including the ball bearings from Enduro Bearings. In the MX version, the TARVO has 170 mm rear Travel.
Price 399.00 EUR
Price incl. VAT
Plus shipping
Not available
Bolt M14xP2,0
Bolt M14xP2,0
Price 9.90 EUR
Price incl. VAT
Plus shipping
Not available
UDH Derailleur Hanger
UDH Derailleur Hanger
Spare derailleur hanger for the UDH standard. Works with derailleurs from all brands that use the standard mounting position. Weight 27 g.
Price 14.90 EUR
Price incl. VAT
Plus shipping
Available
Bolt-M10xP1,0
Bolt-M10xP1,0
Price 7.90 EUR
Price incl. VAT
Plus shipping
Not available
Chainstay Protector
Chainstay Protector
The chainstay protector is compatible with all TARVO and CINTO frames. The protection is supplied ready for assembly.
Price 24.90 EUR
Price incl. VAT
Plus shipping
Not available
Rocker Set TARVO 29 - 160 mm
Rocker Set TARVO 29 - 160 mm
TARVO Rocker for the 29er setup. The rocker is milled in Germany and is delivered ready for assembly including the ball bearings from Enduro Bearings.
Price 399.00 EUR
Price incl. VAT
Plus shipping
Not available
Bearing 10x22x6
Bearing 10x22x6
Enduro Bearings Max Type. Full complement and seeled deep grove Black Oxide ball bearing in the dimension 10x22x6 mm. Specially designed for use in Full Suspension frames and fully filled with grease.
Price 7.90 EUR
Price incl. VAT
Plus shipping
Available
ISCG 05 adapter
ISCG 05 adapter
This ISCG 05 adapter is placed under the bottom bracket cup where it engages with the frame interface. The adapter can be used to fit chain ring guards and chain devices that use the ISCG 05 hole pattern. Weight 21 g.
Price 29.90 EUR
Price incl. VAT
Plus shipping
Available
Cane Creek 40 preload set
Cane Creek 40 preload set
The Cane Creek preload kit matches the style of the 40 series head set. Weight 27 g.
Price 9.90 EUR
Price incl. VAT
Plus shipping
Available
Cane Creek 40 Series
Cane Creek 40 Series
The proven 40 seriens head set by Cane Creek features zinc coated bearings to improve corrosion resistance. These bearings take a moment to run in. Head set spec is IS41/IS52. Top stack height 9 mm. Bottom stack height 1 mm. Weight 76 g.
Price 34.90 EUR
Price incl. VAT
Plus shipping
Available
LAST axle
LAST axle
Our custom axle has a cone shaped tip to ease installation. Opertion is done with a hex key. We recommend this axle for riders above 80 kg and for all riders that ride hard. From 90 kg upwards this axle is mandatory. Weight: 46 g
Price 19.00 EUR
Price incl. VAT
Plus shipping
Available
Bearing 15x28x7
Bearing 15x28x7
Enduro Bearings Max Type. Full complement, stainless steel, seeled deep grove ball bearing in the dimension 28x15x7 mm. Specially designed for use in Full Suspension frames and fully filled with grease.
Price 12.90 EUR
Price incl. VAT
Plus shipping
Available
Lower Shock Mount Set
Lower Shock Mount Set
The mounting hardware is made of titanium and coated in the PVD process. Compatible with all CLAY, COAL, GLEN, TARVO and CINTO models.
Price 19.80 EUR
Price incl. VAT
Plus shipping
Not available